The KEOPS tool for testing electrical harnesses

On helicopters intended for multi-purpose missions, electrical harnesses are fitted in anticipation of connecting the aircraft to optional equipment such as hoists, winches… To check that they work, the equipment itself was needed.

A simplified procedure for testing electrical harnesses

In 2013, Airbus Helicopters asked Avielec, an aeronautical wiring expert, to develop a simplified procedure for testing electrical harnesses. The company proposed that Nerys co-build a solution. The solution, named KEOPS for Kit & Options, consisted in developing a test machine to simulate the electrical responses of a hoist.

"We had many discussions with the helicopter operators and technicians to clarify their needs and understand the requirements of the test and quality-control procedures on the aircraft," explains Sébastien Devisscher, who led the project at Nerys. "Avielec did all the wiring of the test cabinet," he adds. Nerys took charge of the software part.

The system developed relies on a switching matrix driven by a complete program specifically developed in LabVIEW. "The switching matrix is like a grid. It makes it possible to take into account every combination of wires, test each termination and automate the setpoints," explains the project manager.

More than a thousand automated tests

The Keops interface looks like an operating procedure. Care was taken over ergonomics. "In practice, the technician, equipped with a tablet, is guided step by step throughout the procedure. Keops lets them go through the whole checklist simply and quickly. We automated a thousand electrical connection tests, which is a considerable time saving for the technicians," stresses Sébastien Devisscher.

The solution was very well received by the operational teams and the quality department of Airbus Helicopters. He adds: "From the outset, we wanted to put in place a solution that could be flexible and scalable. In this respect, we anticipated the possibility of also taking voltage and resistance measurements, etc."

A Keops 2 was built to test the connection of a sonar. A third version made it possible to check the wiring of the engines before installation. "With this development, we achieved a mature version of KEOPS. The system can now simulate all the equipment intended to be connected to electrical harnesses without any hardware development," explains Sébastien Devisscher.

Another source of pride: the system has been adopted by the German teams, where it has been running for more than two years.

  1480 Avenue d'Arménie
Pôle d'Activités Yvon Morandat
13120 Gardanne

  ZA du Héron
597  route des Bons Prés
73110 La Croix-de-la-Rochette

Conception de moyen d'essais

Your tests partner

Mesulog