CompactRIO training – LabVIEW FPGA and LabVIEW Real-Time

LabVIEW FPGA single-cycle timed loop (SCTL) with FFT and FIFO, from the CompactRIO course material

5 days · Advanced · Open-enrolment or in-house · On site

Master the complete chain of an NI embedded system: from the I/O module to the FPGA, from the FPGA to the real-time processor, and from the cRIO to the supervision PC. Five days to design deterministic, robust applications.

Who is this course for?

  • LabVIEW developers who need to program CompactRIO, sbRIO or real-time PXI targets
  • Test engineers and automation engineers in charge of control or high-speed acquisition systems

Prerequisites: Good LabVIEW practice (Level 2 or equivalent): queues, events, producer/consumer architecture. No prior knowledge of FPGA or real-time is required.

Learning objectives

By the end of the course, participants are able to:

  • Configure a CompactRIO: network, MAX, software installation, file transfer, LabVIEW project
  • Program an FPGA in LabVIEW: constraints, fixed point, acquisition, timing, memory and FIFOs
  • Optimise FPGA code with single-cycle timed loops (SCTL), pipelining and derived clocks
  • Exchange data between FPGA and real-time: DMA FIFOs, interrupts, variables
  • Design a deterministic LabVIEW Real-Time application: scheduling, priorities, memory, timed loops
  • Communicate between tasks and to the network: FGVs, RT FIFOs, shared variables, TCP/UDP/STM, web services
  • Secure and deploy: error handling, watchdog, startup executable, system images

Programme

Chapter 1 – The CompactRIO
Hardware architecture: controller, FPGA chassis, C Series modules · NI-RIO drivers · network settings and MAX · installing software on the target · cRIO web page, FTP/WebDAV · creating the project and connecting to the target · overview of LabVIEW FPGA and LabVIEW RT

Chapter 2 – LabVIEW FPGA
FPGA principle and compilation · FPGA project and VI, specific palettes, simulation mode · programming rules · numeric representations and fixed point · acquisition and module options · timing and time measurement · memory, FIFOs, registers, handshake · SCTL, pipelining, derived clocks, 4-wire synchronisation · FPGA ↔ RT communication: interface, DMA FIFO, IRQ

Chapter 3 – LabVIEW Real-Time
Definitions: determinism, jitter, cycle time · architecture of a real-time system, scheduling, tasks · memory management and fragmentation · timed loops, priorities, synchronisation, shared resources · Scan Engine and DAQmx on cRIO · local communication (FGVs, RT FIFOs, shared variables) and network communication (network variables, UDP, TCP, STM, web services) · profiling and performance · error handling · RT and FPGA watchdog · deployment: startup executable, Replication and Deployment (RAD)

Hands-on work on CompactRIO: acquisition and processing on the FPGA, DMA transfer to the real-time controller, supervision from a Windows PC, then stand-alone deployment.

Teaching method and resources

  • One workstation per trainee, LabVIEW and acquisition hardware provided
  • Alternating theory and hands-on exercises on a running project
  • PDF course material given to each participant
  • Assessment of learning at the end of the course and certificate of attendance
  • Qualiopi-certified training provider: OPCO funding possible in France

Practical details

  • Duration: 5 days (7 h / day)
  • Format: open-enrolment (see the calendar) or in-house, on site or in a virtual classroom
  • Locations: open-enrolment sessions on our premises in Gardanne (Aix-en-Provence / Marseille), Moirans (Grenoble) and La Rochette (Chambéry), France; in-house on your site anywhere in France or Europe; or remotely in a virtual classroom. Courses are delivered in French; English-language sessions on request.
  • Price: on quotation, depending on the format and number of participants
  • Registration: possible up to 10 days before the session; accessibility for people with disabilities: contact us to adapt the course

Your trainers

  • Frédéric Bernard – LabVIEW, CompactRIO & VASCO | Certified Professional Instructor (CPI), Certified LabVIEW Architect (CLA), Certified LabVIEW Embedded Systems Developer (CLED)
  • Anthony Asaro – LabVIEW | Certified LabVIEW Architect (CLA), Certified TestStand Developer (CTD)
  • Kevin Pelé – LabVIEW & VASCO | Certified LabVIEW Developer (CLD)

Request a training course

Please fill in this required field.
Please fill in this required field.

Training calendar

Open-enrolment sessions scheduled every month: LabVIEW Beginner level (3 days) from the 2nd Tuesday of the month, Intermediate level (2 days) the following week and Expert level (3 days) the week after; VASCO training (3 days) on the 1st Tuesday of even months. No session between Christmas and New Year. Indicative dates: contact us to confirm a session or to organise training on your site or remotely.

  • Upcoming sessions: LabVIEW Beginner, Intermediate and Expert every month over three consecutive weeks from the 2nd Tuesday; VASCO on the 1st Tuesday of even months.

  1480 Avenue d'Arménie
Pôle d'Activités Yvon Morandat
13120 Gardanne

  ZA du Héron
597  route des Bons Prés
73110 La Croix-de-la-Rochette

Conception de moyen d'essais

Your tests partner

Mesulog