Non-destructive measurements

Cofice specialises in industrial expertise, in particular non-destructive testing and inspection. As some measurements are taken at height and in high-risk environments (chimneys, tanks, pipes, silos, …), Cofice studied the possibility of taking some of these measurements using a multi-rotor drone. Nerys designed the automated fluid injection system required for proper measurement, and developed the interface for remotely controlling the entire non-destructive measurement chain.


OBJECTIVE

  • Take measurements while keeping the operator in a safe area
  • Gain responsiveness compared with conventional alternatives based on a cherry picker or scaffolding

SOLUTION

  • Design of a pole and miniaturisation of the measurement chain to comply with the payload weight limit (1,000 g)
  • Connection of the control station to the Wi-Fi access point on board the drone
  • Development, in LabVIEW, of a control interface for the non-destructive measurement board
  • Use of an ARM board to acquire and generate signals and transmit data to the ground control station

  1480 Avenue d'Arménie
Pôle d'Activités Yvon Morandat
13120 Gardanne

  ZA du Héron
597  route des Bons Prés
73110 La Croix-de-la-Rochette

Conception de moyen d'essais

Your tests partner

Mesulog