Wear testing of road marking products

For the development of its road marking products, the composite coatings laboratory of Colas built a wear simulator able to reproduce, on samples, the passage of vehicles on the road surface.


OBJECTIVE

The wear simulator's control system must be able to run the programmed tests while complying with operational safety rules.

  • Drive the turntable (8 m diameter) to reach 90 km/h on the running track
  • Run tests of 4 million wheel passes with periodic readings
  • Build a database of the samples tested (from sites or prototypes)
  • Monitor test conditions (temperature, %RH)
  • Apply a load on each wheel and detect punctures
  • Trigger spray cleaning at regular intervals

SOLUTION

The solution based on the Vasco software consists of:

  • Interfacing the power electrical cabinet
  • Acquiring and monitoring the quantities to be measured
  • Running the rolling cycles and the interruptions for inspection
  • Triggering the camera shots for each sample

  1480 Avenue d'Arménie
Pôle d'Activités Yvon Morandat
13120 Gardanne

  ZA du Héron
597  route des Bons Prés
73110 La Croix-de-la-Rochette

Conception de moyen d'essais

Your tests partner

Mesulog